DESCRIPTION: CHLOR*WASH is an organic bonding chemical blend which aids in the removal of road films, dirt, and chloride, sulfate and nitrate salts. It contains no volatile organic compounds (VOC) and is non-flammable. CHLOR*WASH is biodegradable and therefore is an integral part of a sustainable environment.
PRESSURE WASHING: CHLOR*WASH may be added to the water of the pressure washer, usually in a dilution ratio of 1:12. Add CHLOR*WASH by means of a metering pump, a reservoir water supply or a siphon device. Use potable water or other approved source. Flush washer and lines prior to application. In areas of heavy contamination, slow the wash speed to enable CHLOR*WASH to penetrate.
HAND WASHING: May be sprayed onto a surface full strength using a garden type sprayer, then rinse off. Scrubbing with a nylon bristle brush may be implemented to assist in removal of heavy buildup.
Due to a wide variety of surface conditions, work environments, weather conditions, etc., these directions are general and may require alterations to better suit individual conditions. Call CHLOR*RID International Inc. for recommendations for a specific project. CHLOR*RID International Inc. assumes no liability for use or misuse of the product inconsistent with its labeling.
WARRANTY: CHLOR*RID International Inc. warrants this product to be identical in chemical and physical properties from batch to batch within the specification limits of the raw materials used in its manufacture.
SAFETY PRECAUTIONS: KEEP OUT OF REACH OF CHILDREN. Do not mix with other chemicals. See M.S.D.S. for full precautions before use. This product is intended for professional use only.
PRINTABLE DOCUMENTS:
• CHLOR*WASH Directions / Instructions (.pdf)